NetBeez

NetBeez can be configured to send traps to an SNMP trap receiver.

Access NetBeez Settings by clicking the gray cog icon in the upper right of the dashboard

Access the Integrations tab and click the button to the On position for SNMP.

1. SNMP server (required): The IP address or fully qualified hostname of the SNMP server.
2. Trap port (required): Enter the port number in this field.
3. Version (required): NetBeez supports only v.1 or v.2c.
4. Read-Only Community (required): Specify the name of the read-only community.

Click the Test button to test the applied configuration.

1. Access NetBeez Settings by clicking the gray cog icon in the upper right of the dashboard
2. Access the Integrations tab and click the button to the On position for SNMP.
3. Input the following information:
4. 1. SNMP server (required): The IP address or fully qualified hostname of the SNMP server.
 2. Trap port (required): Enter the port number in this field.
 3. Version (required): NetBeez supports only v.1 or v.2c.
 4. Read-Only Community (required): Specify the name of the read-only community.
5. Click Save.
6. Click the Test button to test the applied configuration.

After SNMP has been configured, navigate to the <a href="https://intercom.help/netbeez/en/articles/10406746" rel="nofollow noopener noreferrer" target="_blank">Notification Settings</a> tab to select which notifications will be sent.

Configure SNMP Alert Notifications

Create a custom design with text, images, and links

Description

Procedure