Insert the micro-USB output of the PoE splitter into the micro-USB input of the Agent

Insert the Ethernet cable of the splitter into the interface of the Agent

Connect the Ethernet cable from your switch to the "DATA IN" port of the PoE

You should see the red LED on the Agent turn on

Connect the Ethernet cable from your switch (blue cable) to the "IN" port of the PoE

Wait for the Green LED on the PoE to turn on

Use the short Ethernet cable to connect the Agent's interface to the "OUT" port of the PoE

Insert the barrel jack power cable into the power input of the GigE Agent

The blue LED on the agent should turn on

Check the PoE's Voltage switch and make sure it is set to tp 5V (move the switch all the way to the end, closer to the side with the POWER and DATA OUT ports)

Insert the straight end of the barrel cable into the "Power" output of the PoE

Insert the other end of the barrel cable into the power input of the GigE Agent

Use the short Ethernet cable to connect the Agent's interface to the "DATA OUT" port of the PoE

Connect the Ethernet cable from your switch to the "DATA IN" port of the PoE

The green LED corresponding to 5V should turn on and then the blue LED on the agent should turn on